Filter
Kategorien
Anbieter
Verfügbarkeit
Preis
-
Von
bis
Neu
Im Angebot
DS-1214-ZJ(FH)-P
DS -1214 -ZJ(FH)-P Horizontal Pole Mount Feature For horizontal pole mounting The clamps are made of stainless steel Dimension 272 mm (10 .7 ") 68 mm (2.68") 330 mm (13 .0 ") 122.6 mm (4.83") Ø70 mm (4.83") Ø6.5 mm (0.26") 3-M6 46 mm (1.81") 43 mm (1.69") Ø40 mm to 80 mm (Ø1.57" to 3.15") Available Model DS-1214 -ZJ(FH)-P Parameter Model Parameters DS -1214 -ZJ(FH)-P Horizontal Pole Mount Appearance Platinum grey Material Steel Dimension 122.6 mm x 330 mm x 46 mm (4.83" x 13" x 1.81") Weight 1.36 kg (3.0 lb.) No te Load capacity of the pole must be at least 3 times as much as the total weight of the camera, and the mount. The moun t’s maximum load capacity is 6 kg (13.23 lb.). 01000020200604...
Garantie: 36 mon.
Datentabelle 
Verfügbarkeit: 0
DS-1214ZJ
DS-1214ZJ Horizontal Pole Mount Features: For horizontal pole mounting The clasp is made of stainless steel Mounting board is made of aluminum die-casting alloy Dimension: Order Model: DS-1214ZJ Parameter: Model Parameter DS-1214ZJ Horizontal Pole Mount Bracket Appearance Hikvision White Material Aluminum Alloy & Steel Dimension 117x226x194mm Weight 1895g Notice: The site of screw hole should be noticed when using with housing Load capacity of pole should be more than 3 times the weight of camera and bracket Load capacity of clamp is 6 KG Note: The actual bracket may vary from the picture above....
Garantie: 36 mon.
Datentabelle
Verfügbarkeit: 0
DS-1214ZJ-T
DS-1214ZJ-T Horizontal Pole Mount Feature Steel and stainless steel with surface spray treatment Adjustable tilt angle from -90° to 90°, and pan angle from 0° to 90° Dimension 194 mm (7.64 " ) 117 mm (4.61" )138 .5 mm (5.45 " ) 30 .2 mm (1.19 " ) 22 .8 mm (0.90 " ) 70 mm to 127 mm (2.7" to 5" ) Ø 10.2 mm (0.40" ) 28.8 mm (1.13" ) 24.2 mm (0.95" ) Available Model DS-1214ZJ-T Parameter Model Parameters DS-1214ZJ-T PT Joint Appearance Hikvision White Material Steel and Stainless Steel Dimension 194 mm x 117 mm x 138.5 mm (7.64" x 4.61" x 5.45") Weight 1900 g (4.19 lb.) Note The waterproof rubber is necessary for the outdoor application. The pole must be capable of supporting at least 3 times as much as the total weight of the camera, and the mount. The joint’s maximum load capacity is 6 kg (13.2 lb.). 0100001080201...
Garantie: 36 mon.
Datentabelle
Verfügbarkeit: 0
DS-1227ZJ-DM37
DS-1227ZJ-DM37 In-Ceiling Mount Features Steel and plastic with surface spray treatment In-ceiling mount saves installation space Dimension Ø 225 mm (8.86" ) Ø 101.1 mm (3.98" ) 98.2 mm (3.87" ) 17.6 mm (0.69" ) Ø 207 mm (8.15" ) Ø 45 mm (1.77" ) Available Model DS-1227ZJ-DM37 Parameter Model Parameters DS-1227ZJ-DM37 In-Ceiling Mount Appearance Hikvision White Material Steel and Plastic Dimension Ø 225 mm x 98.2 mm (8.86" x 3.87") Weight 700 g (1.54 lb.) Notes The mount should be installed on the flat ceiling The ceiling must be capable of supporting over 3 times as much as the total weight of the camera and the mount The maximum load capacity of the mount is 3 kg (6.6 lb.)...
Garantie: 36 mon.
Datentabelle
Verfügbarkeit: 0
DS-1227ZJ-P1
Datasheet 1 DS-1227ZJ Model DS-1227ZJ Indoor dome flush mount Appearance Feature Suitable for DS-2CD783F-E(I), DS-2CD754F-E(I), DS-2CD763NF-E, DS-2CD764FWD-E(I), DS-2CD793NFWD-E(I) and DS-2CD733F-E, etc., dome camera with the same structure Construction Sheet metal and ABS plastic Weight 540g(1.19lbs) Dimensions Φ210.0x84.5mm (Φ8.27"x3.33") Bore Size Unit: mm...
Garantie: 36 mon.
Datentabelle
Verfügbarkeit: 0
DS-1232ZJ
DS-1232ZJ Cardan Joint Feature Enables the angle adjustment from -60° to 60° Applied to both indoor and outdoor conditions Dimension Φ 6.5 mm (0.26") 30 mm ( 1 .18 ") 96 mm ( 3 .78 ") 126 mm ( 4 .96 ") 6.5 mm (0.26") 103.5 mm (4.07") 83 mm ( 3 .27 ") Φ 70 mm (2.76") Φ 6.6 mm (0.26") Available Model DS-1232ZJ Parameter Model Parameters DS-1232ZJ Cardan Joint Appearance Hikvision White Material Steel Dimension 126 mm x 103.5 mm x 83 mm (4.96" x 4.07" x 3.27") Weight Approx. 760 g (1.68 lb.) Note The cardan joint should be installed on a flat surface. Waterproof rubber is necessary for the outdoor application. The wall should be capable of supporting at least 3 times as much as the total weight of the camera and the cardan joint. The maximum load capacity of the cardan joint is 6 kg (13.23 lb.)....
Garantie: 36 mon.
Datentabelle
Verfügbarkeit: 0
DS-1232ZJ-T
DS-1232ZJ-T PT Joint Feature Steel and stainless steel with surface spray treatment Adjustable tilt angle from -90° to 90°, and pan angle from 0° to 90° Dimension 100 mm (3.94" ) 81.8 mm (3.22" ) 24.2 mm (0.95" ) 6.2 mm (0.24" ) 95 mm (3 .74 " ) 75 .8 mm (2 .98 " ) 30 .2 mm (1 .19 " ) Ø 10.2 mm (0.40" ) 92 .5 mm (3 .64 " ) 100 mm (3 .94 " ) 96 mm (3.78" ) Ø 6.5 mm (0.26" ) Ø 70 mm (2.76" ) 95° Available Model DS-1232ZJ-T Parameter Model Parameters DS-1232ZJ-T PT Joint Appearance Hikvision White Material Steel and Stainless Steel Dimension 100 mm x 100 mm x 92.5 mm (3.94" x 3.94" x 3.64") Weight 850 g (1.87 lb.) Note The joint’s maximum load capacity is 6 kg (13.2 lb.). 0100001080201...
Garantie: 36 mon.
Datentabelle
Verfügbarkeit: 0
DS-1241ZJ
DS-1241ZJ In-ceiling Mounting Bracket for Dome Camera Features: Aluminum alloy material with surface spray treatment Design of cap is for convenient wiring Dimension: Order Model: DS-1241ZJ Parameter: Model Parameters DS-1241ZJ In-ceiling Mounting Bracket for Dome Camera Appearance Hikvision White Material Aluminum Alloy Dimension Φ210x26.8mm Weight 260g Notice: The bracket should be installed on flat wall Waterproof rubber is necessary for outdoor application The wall must be capable of supporting over 3 times as much as the total weight of the camera and the mount. The maximum load capacity of the bracket is 4.5KG Model Suitable: DS-2CC51xxP(N)-VP series DS-2CC51xxP(N)-VPIR series DS-2CC51xxP(N)-VPIRH series DS-2CE555F5P(N)-(A)VPIR3 DS-2CE56D5T-(A)VPIR3 DS-2CE56C5T-(A)VPIR3 Note: The actual dome camera may vary from the picture above....
Garantie: 36 mon.
Datentabelle
Verfügbarkeit: 0
DS-1253ZJ-M
DS-1253ZJ-M Rain Shade for Outdoor Dome Camera Features: Water chute design for preventing rainwater from flowing to camera housing; Prevent direct sunlight and improve image quality; Rain protection and six -level windproof; Weaken the possibility of freezing; Match up with wall mount(DS-1272ZJ series) Dimension: Order Model: DS-1253ZJ-M Parameter: Model Parameters DS-1253ZJ-M Rain Shade for Outdoor Dome Camera Appearance Hikvision White Material PP+30%GF Dimension Φ191.1x76mm Weight 133g Notice: The rain shade should be installed on flat wall The wall must be capable of supporting over 3 times as much as the total weight of the camera and accessory. Note: The actual dome camera may vary from the picture above. 76 □191.1 □33.4...
Garantie: 36 mon.
Datentabelle
Verfügbarkeit: 0
DS-1258ZJ-L
DS-1258ZJ Wall mount for indoor cameras Features: Good toughness and strength Beautiful design with wire outlet hole Coordination with small and nice appearance Dimension: Order model: DS-1258ZJ Parameters Model Parameters DS-1258ZJ Indoor wall mount Color Hik white Feature Suitable for mini dome or dome camera Material ABS+PC Dimension 111x120x161.5mm() Weight 200g Notice: Pay attention to the application range when select bracket Pay attention to the color matching when select bracket The bracket should be installed on flat wall The wall must be capable of supporting more than 3 times the total load of the camera and the mount. The maximum load capacity of the mount is 2.0KG Installation steps: ① Select suitable wall to install the bracket ⑥ Loosen the tightening screw and take down ⑥ Install the dome core to the gang box, and wire. the housing. ...
Garantie: 36 mon.
Datentabelle
Verfügbarkeit: 0
DS-1268ZJ
DS-1268ZJ Pendent Mounting Bracket for Dome Camera Features: Aluminum alloy material with surface spray treatment Design with cable entry hole Dimension: Order Model: DS-1268ZJ Parameter: Model Parameters DS-1268ZJ Pendent Mounting Bracket for Dome Camera Appearance Hikvision White Range of Application Suitable for dome camera pendent mounting Material Aluminum Alloy Dimension Φ139x590mm Weight 2200g Notice: The bracket is for dome camera Pay attention to color matching The bracket should be installed on flat wall The wall must be capable of supporting over 3 times as much as the total weight of the camera and the mount. The maximum load capacity of the bracket is 4.5KG Model Suitable: DS-2CD72XXF-E(I)Z(H)(S),DS-2CD72X3PF-E(I)Z(H)(S),DS-2CD72X3NF-E(I)Z(H)(S),DS-2CD7293PFWD-E(I)Z(H)(S),DS-2CD7293NFWD- E(I)Z(H)(S),DS-2CD72X4FWD-E(I)Z(H)(S),DS-2CD4312F(WD)-(I)(Z)(H)(S),DS-2CD4324F-(I)(Z)(H)(S),DS-2CD4332FWD-(I)(Z)(H)(S) Installation Step: ① Choose the appropriate wall...
Garantie: 36 mon.
Datentabelle
Verfügbarkeit: 0
DS-1269ZJ-P
DS -1269ZJ -P Pendant Mount Feature Enables the pan position adjustment from 0° to 360°, tilt position adjustment from -60 ° to 60° Routing cables inside the mount provides high reliability Applied to both indoor and outdoor conditions Dimension 493 mm ( 19 .41 '' ) 16 mm (0.63'') Φ 88 mm (3.46'') 4-Φ 8.2 mm (0.32'') 25 mm (0.98'') 6 .4 mm ( 0 .25 '' ) 75 mm ( 2 .95 '' ) Available Model DS -1269ZJ-P Parameter Model Parameters DS -1269ZJ-P Pendant Mount Appearance Platinum Gray Material Aluminum Alloy Dimension Φ 88 x 493 mm x 246 mm (3.46’’ x 19.41’’ x 9.69’’) Weight Approx. 540 g (1.19 lb.) No te The mount should be installed on a flat surface. Waterproof rubber is necessary for the outdoor application . The wall should be capable of supporting at least 3 times as much as the total weight of the camera and the mount. The maximum load capacity of the mount is 6 kg (13.23 lb.)....
Garantie: 36 mon.
Datentabelle
Verfügbarkeit: 0
DS-1271ZJ-130
DS-1271ZJ-130 Pendent Mounting Bracket for Dome Camera Features: Aluminum alloy material with surface spray treatment Waterproof design Cable hole on bracket makes the feature better Design of cap is for convenient wiring Dimension: Order Model: DS-1271ZJ-130 Parameter: Model Parameters DS-1271ZJ-130 Pendent Mounting Bracket for Dome Camera Appearance Hikvision White Material Aluminum Alloy Dimension Φ150X565mm Weight 1900g Notice: The bracket should be installed on flat wall The wall must be capable of supporting over 3 times as much as the total weight of the camera and the mount. The maximum load capacity of the bracket is 4.5KG Model Suitable: DS-2CD7X3PF(NF)-E(I)(Z),DS-2CD793PFWD-E(I)(Z),DS-2CD793NFWD-E(I)(Z),DS-2CD7X4FWD-E(I)(Z) DS-2CD7XXF-E(I)(Z),DS-2CD783F-EP,DS-2CD4112F-(I),DS-2CD4112FWD-(I),DS-2CD4124F-(I),DS-2CD4132FWD-(I) Installation Step: ① Choose the appropriate wall to install the ceiling plate and wiring ② Connect pole and adaptor cap; wiring and screw up ③ Screw up in A & B and fix pendent pole and cap ④ Scr...
Garantie: 36 mon.
Datentabelle
Verfügbarkeit: 0
DS-1271ZJ-140-DM45
DS-1271ZJ-140-DM45 Pendant Mount Feature Aluminum alloy with surface spray treatment The cap facilitates the installation Applies to both indoor conditions, and outdoor conditions Dimension 545 .7 mm (21 .48 " ) Ø130 mm (5.12" ) Ø 140 mm (5.51" ) 3-M4 Ø 121.2 mm (4.77" ) Ø 150 mm (5.91" ) 4-Ø 8.5 mm (0.33" ) Available Model DS-1271ZJ-140-DM45 Parameter Model Parameters DS-1271ZJ-140-DM45 Pendant Mount Appearance Hikvision White Material Aluminum Alloy Dimension Ø 150 mm x 545.7 mm (5.91" x 21.48") Weight 1125 g (2.48 lb.) Notes The mount should be installed on the flat surface. The waterproof rubber is necessary for the outdoor application. The wall must be capable of supporting at least 3 times as much as the total weight of the camera, and the mount. The mount’s maximum load capacity is 3 kg (6.61 lb.). 0100001080511...
Garantie: 36 mon.
Datentabelle
Verfügbarkeit: 0
DS-1271ZJ-DM30
DS-1271ZJ-DM30 Pendant Mounting Bracket for Dome Camera Features Aluminum alloy material with surface spray treatment Waterproof design Design of cap is for convenient wiring Dimension 6 5 0 Φ121.2 4-Φ8.5 Φ209 Φ181 4-M4 Depth 10 Available Model DS-1271ZJ-DM30 Parameters Model Parameters DS-1271ZJ-DM30 Pendant Mounting Bracket for Dome Camera Appearance Hikvision White Material Aluminum Alloy Dimension Φ209x650mm Weight 2050g Notes The bracket should be installed on flat wall Waterproof rubber is necessary for outdoor application The wall must be capable of supporting over 3 times as much as the total weight of the camera and the mount. The maximum load capacity of the bracket is 3KG...
Garantie: 36 mon.
Datentabelle
Verfügbarkeit: 0
DS-1271ZJ-DM30-E
DS-1271ZJ-DM30-E Pendant Mounting Bracket for Dome Camera Features Aluminum alloy material with surface spray treatment Waterproof design The extendable design for the bracket facilitates installation Dimension 127.8 mm (5.03") 127 .8 mm (5.03 ") 588 .9 mm (23 .18 ") Available Model DS-1271ZJ-DM30-E Parameters Model Parameters DS-1271ZJ-DM30-E Pendant Mounting Bracket for Dome Camera Appearance Hikvision White Material Aluminum Alloy Dimension Φ 205.9 mm x 598.9 mm (8.09" x 23.18") Weight 1920 g (4.2 lb.) Notes The bracket should be installed on the flat wall. The waterproof rubber is necessary for the outdoor application. The wall must be capable of supporting over 3 times as much as the total weight of the camera and the bracket. The maximum load capacity of the bracket is 3 Kg (6.6 lb.)....
Garantie: 36 mon.
Datentabelle
Verfügbarkeit: 0
DS-1271ZJ-PT10
DS -1271 ZJ-PT10 Pendant Mount Feature Aluminum alloy and plastic with surface spray treatment The cap facilitates the installation Dimension 532 mm (20.9" ) 121.2 mm (4.77" ) 121.2 mm (4.77" ) Ø 160.6 mm (6.32" ) Ø 150 mm (5.91" ) 4-Ø 8.5 mm (0.33" ) Available Model DS -1271ZJ-PT10 Parameter Model Parameters DS -1271ZJ-PT10 Pendant Mount Appearance Hikvision White Material Aluminum A lloy and Plastic Dimension Ø 160.6 mm x 532 mm (6.32" x 20.9 ") Weight 1300 g (2.87 lb.) No te The mount should be installed on the flat surface. The waterproof rubber is necessary for the outdoor application. The wall must be capable of supporting at least 3 times as much as the total weight of the camera, and the mount. The mount ’s maximum load capacity is 3 kg (6.61 lb.)....
Garantie: 36 mon.
Datentabelle
Verfügbarkeit: 0